Bulk Landscape Materials, Grouped by the Job Rather Than the Category

Driveway Gravel
For a Connecticut driveway apron or parking area, Driveway Gravel packs into a firm crushed-stone surface for regular vehicle traffic. Size: 3/4 inch. Grading: Graded mix of stone sizes. Type: Crushed stone.
Free Delivery

Walkway Gravel
Walkway Gravel keeps a tidy, natural-looking surface along Connecticut garden paths, with drainage that helps water move through the walking area. Size: 3/8 inch. Grading: Graded mix of stone sizes. Type: Crushed stone.
Free Delivery

Crusher Run
Set Crusher Run beneath a Connecticut driveway apron or patio surface when the ground needs a tightly compacted base. Size: 3/4 inch minus. Grading: Crushed stone blended with stone dust and fine particles. Type: Angular crushed stone.
Free Delivery

Processed Gravel
For a Connecticut driveway apron, Processed Gravel provides a dense compacted base over ground affected by frost and glacial till. Size: 3/4 inch minus. Grading: Graded mix of crushed stone, gravel and binding fines. Type: Crushed aggregate blend.
Free Delivery

Crushed Concrete
Once compacted, Crushed Concrete forms a stable, load-bearing layer for Connecticut driveway aprons, parking areas, and access routes. Size: 1-1/2 inch minus. Grading: Angular pieces blended with fines. Type: Recycled crushed concrete.
Free Delivery

Gravel Sand
3/4 inch minus crushed stone blended with fine stone dust. Compacts tightly to create a rock-solid base for driveways, patios, and construction projects.
Free Delivery
Two piles of gray crushed stone can look identical at ten feet and behave like opposites once they are in the ground. One has its fines left in, so it binds and compacts and sheds water. The other is washed, so the voids stay open and water runs straight through. Ordering bulk landscape materials in this state goes wrong far more often at that fork than at any question of size or color. The grouping below follows the job, so the fork is decided before you open a product page.
A drive that ruts every spring: the bearing layer, then the layer you see
Processed Gravel at one inch minus is the base most drives here are built on, with Crusher Run where the tightest compacted layer is wanted. On top go Driveway Gravel or 3/4 inch trap rock. Processed gravel and trap rock are the trade names yards here use for these two listings rather than specification numbers, so read the size and grading on each. Order the two courses separately: the base has to be shaped and rolled before anything covers it.
Getting water off a till lot before it reaches the foundation
Washed stone only. #57 Stone and Drain Rock for footing perimeters, curtain drains and drywells, #67 Stone for pipe bedding and downspout runs, and #4 Crushed Stone where a trench bottom or a construction entrance is carrying real weight in wet ground. Railroad Ballast is the coarsest of them.
Bluestone, pavers and the bed they are set into
Stone Dust is the New England bedding default under flatwork, wetted and compacted before the stone goes down. #89 Crushed Stone and #8 Crushed Stone handle joints and tight bedding, and 3/8 inch crushed stone suits a walking surface that has to stay firm underfoot.
Paths, play areas and beds that will not need raking back in April
3/8 inch pea stone for walkways and play areas, Walkway Gravel where a finer, walkable surface is wanted, River Rock for borders and dry creek beds, and Large River Rock where the feature needs weight rather than another scattering of small stone. Shredded Mulch rounds out the planted side.
Bringing a settled corner back up, then finishing the top six inches
Fill Dirt does the bulk of a regrade and the lower half of a filled hole. Top Soil goes on last for lawn and bed prep over rocky ground, and Garden Soil is the blend for raised beds and planting areas. Mason Sand and Washed Sand cover brickwork, joints and bedding under slabs.
After a nor'easter, or after a bank has scoured out
RipRap is the armor stone for shoreline edges along the Sound and for stream banks that have cut back after heavy rain and thaw. It is sized and placed differently from anything else on this list, in layers rather than a spread course.
Ordering bulk landscape materials by the ton rather than the yard
Each listing publishes size, grading and type, so a written spec can be checked against it line by line. Once the material is settled, put your measurements through the calculators to turn square footage and depth into tons, then set the quantity, the delivery date and the delivery ZIP code at checkout.
Common questions
My job has a base course and a surface course. Do I buy one material or two?
Two, and you size them separately. Take a 24 by 12 parking pad as a hypothetical: 288 square feet. Processed gravel at 4 inches is 288 x 4/12 = 96 cubic feet, 3.6 cubic yards, about 5.4 tons at the published 1.50 tons per yard. Trap rock at 2 inches on top is 48 cubic feet, 1.8 cubic yards, roughly 2.5 tons at 1.40. The base is rolled first, then the surface goes on.
The ground stays wet. Should I just order more stone?
Depth on its own rarely fixes it. On till over ledge the water is usually running sideways from uphill, so intercept it with a drain of washed stone first, then build the base over ground that is no longer being fed. A binding material placed into standing water will pump its fines up under traffic no matter how deep it is.
Can I check or change an order once it is placed?
A confirmation email carries the order and delivery details, and you will be contacted to confirm the date and given the local supplier's contact details. More material means a second order rather than an edit; cancellations fall under the site's refund policy.
What gets chosen at checkout?
Product, tonnage, delivery date and the delivery ZIP code the load is arranged from. The delivery terms currently in force are shown there with the order before you confirm.